Telephone: 01382 698 050
Email:enquiries@bradmac.co.uk
In perfect partnership with
You are here
» products » Service Lifts » Service hybrid lifts »» Kar 45
Kar 45
Dimensions: 5000 mm
Code: Kar 45
Kar 45 L=5.000 mm
Vertical electro-hydraulic lift for alignment purposes, with a capacity of 4.500 kg (10.000 lbs)
LT capacity 4.000 kg (8.800 Ibs)
The lift is already according updating of August 2010 of the european norm EN 1493
Versions:
N - standard platform (not equipped)
CA - version with front recess on platform for turn plates and/or play detectors
CT - version for total convergence with front recess on platform and rear plates
LT - version with auxiliary free-wheeling lifttable
All lifts are available above ground and flush mount, one way and drive through version
N - standard platform (not equipped)
CA - version with front recess on platform for turn plates and/or play detectors
CT - version for total convergence with front recess on platform and rear plates
LT - version with auxiliary free-wheeling lifttable
All lifts are available above ground and flush mount, one way and drive through version
Description:
Main Features:
Lift Capacity: 4.500 kg
Platform lenght: 5. 000 mm standard
Collapsed Height = 210 mm ( N version ) –260 mm ( CT/LT version)
Available in the flush mount and above ground version
LT Capacity: 4.000 kg
LT Platforms lenght: from 1.900 to 2.100 mm (capacity reduced to 3.500 Kg)
Safeties
Mechanical Safety Locks in each cylinder
Burst valve in each cylinder
High pressure Relief valve in all cylinders and in control unit
Photocell for control of platforms parallelism
Limit switch with acoustic warning for the complete lowering
Low voltage controls
Dead man controls
Accessories:
Automatic blocking system of the rear slip plates
Automatic platforms realignment
If you would like to make an enquiry about the Kar 45, please use the form below or you can contact Keith by telephone: 01382 698 050
email: enquiries@bradmac.co.uk.
Thank you ! Your message has been sent. We will contact you within the next 24 hours..
Telephone: 01382 698 050
Email: enquiries@bradmac.co.uk
