Telephone: 01382 698 050 Email:enquiries@bradmac.co.uk
You are here » products » Service Lifts » Service Scissor Lifts »» Fox 50 VX

Fox 50 VX

Dimensions: 5260 mm

Code: Fox 50 VX

 

Fox 50 VX L=5260 mm

Electro-hydraulic scissor lift with capacity 5.000 kg (11000 lbs) 
The lift is already according the updating of August 2010 of the european norm EN 1493

Versions:

N - standard runway (not equipped)- 
CA - front recess for turn plates and/or play detectors 
CT - total convergence front recess + rear slip plates 
LT - version with lift-table for wheel free working 
I - flush Mount version

Description

-The CT/LT version offers the maiximum versatility for the alignment service and any other use 
-The access ramps/wheel stops hinged on the platforms eliminate obstacles on the floor when the lift is raised up. 
-The levelling system is provided by master cylinders integrated into the hydraulic unit. 
-The regulating bolts on the base (12) are double to allow regulation between the floor and the base, and between the base and the Platform (with lift closed). 
-The front recess is 50 mm/1,9 inch deep 
-The rear slip plate is 2270 mm/89,4 inch long and is built in the Platform. This is steel made and moves upon plastic rolls. Furthermore, thanks to its generous dimensioning it has +-3° angle of rotation. 
-LT (Lift Table) 3.500 kg (7710 lbs) 
The lift is already according the updating of August 2010 of the european Norm EN 1493 


Safety Devices:

-Parahute valves on the lift and LT 
-Automatically-activated mechanical safety locks 
-Photocells for Platform synchronization control 
-Limit switch with acoustic warning for the complete lowering 
-Low voltage control circuit (24V) 
-"Dead -man " Controls

If you would like to make an enquiry about the Fox 50 VX, please use the form below or you can contact Keith by telephone: 01382 698 050
email: enquiries@bradmac.co.uk.

Thank you ! Your message has been sent. We will contact you within the next 24 hours..

Your Details
Enquiry
Finish

If you are happy with your details above please click the send button below